Appendix IV: Installing BeagleBone drivers
The drivers for BeagleBone SensorGnomes can be found in the table below (copied from the BeagleBone homepage).
Operating System
USB Drivers
Comments
Windows (64-bit)
Windows (32-bit)
If in doubt, try the 64-bit installer first.
Note #1: Windows Driver Certification warning may pop up two or three times. Click "Ignore", "Install" or "Run"
Note #2: To check if you're running 32 or 64-bit Windows see this: support.microsoft.com/kb/827218.
Note #3: On systems without the latest service release, you may get an error (0xc000007b). In that case, please install the following and retry: www.microsoft.com/en-us/download/confirmation.aspx?id=13523.
Note #4: You may need to reboot Windows.
Note #5: These drivers have been tested to work up to Windows 10
On many newer computers, such as those with Windows 10, the operating system blocks the installation of the BeagleBone drivers as they are âunsigned.â The process may simply fail without an informative message.

The way around this is to temporarily disable this security check. Instructions on how to do that can be found here. Option 2 is the simplest and the security measures will revert after the next reboot. The steps are summarized below
1) Hold down the Shift key while you click the âRestartâ option in Windows. Your computer will restart into the Advanced Boot menu

2) Select the âTroubleshootâ tile on the Choose an option screen that appears

3) Select âAdvanced optionsâ

4) Click the âStartup Settingsâ tile

5) Click the âRestartâ button to restart your PC into the Startup Settings screen

6) Type â7â or âF7â at the Startup Settings screen to activate the âDisable driver signature enforcementâ option

Your PC will boot with driver signature enforcement disabled and youâll be able to install unsigned drivers. However, the next time you restart your computer, driver signature enforcement will be disabledâunless you go through this menu again.
Last updated